Yetter 10000 Magnum Series, Assembly Instructions Manual

Page: 13 / 48

13
OPERATION INSTRUCTIONS
Troubleshooting the 10000 Series Magnum
TM
Coulter
Symptom Problem Solution
Mud builds up on press
wheels and wheels stop
turning
Too much down pressure
Field is too wet Remove spring pressure
from press wheels
Wait until field dries before
running
Poor opener penetration
Hard ground conditions
Residue laying in bunches
Excessive residue
Dull disk openers
Disk opener worn too small Add weights to toolbar
frame
Spread residue evenly
across the field
Adjust toolbar for deeper
operation
Sharpen or replace opener
disks
Replace disk opener
Furrow not closing
Field is too wet or overly
hard ground conditions Adjust closing wheel spring
pressure
Soil freezes to blade
Raise toolbar when
stopping to prevent
anhydrous ammonia from
contacting and freezing soil
to blade
Residue buildup in front of
openers
Residue wedged between
scraper and disk opener Verify adjustment bolt is
properly adjusted to hold
scraper against blade
Uneven depth
Residue laying in bunches
In adequate down pressure Spread residue evenly
across field
Increase down pressure or
install weights