Yetter 10000 Magnum Series, Assembly Instructions Manual

Page: 17 / 48

17
MAINTENANCE
Storing the Equipment
Store the machine in an area away from human activity.
Store the machine in a RAISED position.
Install service locks on all wheel cylinders.
At the end of the season the machine should be thoroughly inspected and prepared for
storage. Repair or replace any worn or damaged components to prevent down time at
the beginning of the following season. Store machine under cover with all parts in
operating condition.
•
Clean machine thoroughly to remove all dirt, debris, and crop residue.
•
Inspect machine for worn or broken parts. See your Yetter Farm Equipment
dealer during the off-season so parts and service can be acquired when the
machine is not needed in the field.
•
Lubricate bearings as outlined in the lubrication section.
•
Paint all parts which are chipped or worn to prevent rust.
•
Store machine in a clean, dry location with the unit out of the sun.
•
If the machine cannot be stored inside, cover with a waterproof tarpaulin and tie
securely in place
•
Do not allow children to play on or around the machine