Yetter 10000 Magnum Series, Assembly Instructions Manual

Page: 8 / 48

8
ASSEMBLY INSTRUCTIONS
WARNING:
Never work under the toolbar while in a raised position without
using safety lockups.
WARNING: Use extreme caution, the blade is sharp and may cause bodily
injury. The coulter can be mounted to the toolbar using different techniques.
One way is to mount the main arm assembly to the toolbar and then attach
the components one at a time. Another way is to completely assemble the coulter
before attaching to the toolbar frame.
CAUTION: 10000 Magnum
TM
Fertilizer Coulter and its components are very
heavy. Extra attention to lifting techniques while handling and or maneuvering
the coulter during assembly is very important.
Failure to do so may lead to
personal injury or death.
STEP 1:
Mark the toolbar frame as to the location that each coulter is to be mounted.
IMPORTANT: Install an equal quantity of right hand and left hand coulters to each
section of the toolbar. Example: A 30’ – 3 section toolbar with 12 coulters (6R & 6L)
will need to install 2R and 2L coulters on each section of the toolbar. If any questions
concerning assembly of coulters, then please contact Yetter Farm Equipment for
recommendations at 800-447-5777.
Note: The coulter blade is in line with the center of the mount bracket. Measure from left
edge to left edge or from right edge to right edge to ensure the coulters are mounted at
the desired spacing.