Yetter 10000 Magnum Series, Assembly Instructions Manual

Page: 15 / 48

15
MAINTENANCE
Lubrication Intervals
Lubricate with grease at hourly interval indicated on symbol.
IMPORTANT: The recommended service intervals are based on normal oberating
conditions. Severe or unusual conditions may requre more frequent lubrication.
Perform each lubrication and service procedure at the beginning and each of
each season. Clean grease fittings before using grease gun to avoid injecting dirt
and grit into the bearing. Replace and lost or broken fittings immediately. If a
fitting fails to take grease, remove and clean thoroughly, replace if necessary.
Also check for failure of adjoining parts.
Bearing Replacement Installation
1. When assembling the spoke wheels, bearing assembly, and hubcap, be sure to
align the grease transfer hole in the spoke wheel with the grove in the hubcap
and hole in the hub to allow grease passage.
2. Assembly the wheels, hubs, and caps.
3. Grease the wheel/hub/bearing assembly.