Yealink VC120, Administrator'S Manual

Page: 266 / 319

Administrator’s Guide for Yealink Video Conferencing Systems
250
Web server type parameters on the system are described below:
Parameter Description Configuration Method
HTTP
Enables or disables the user to
access the web user interface of the
system using the HTTP protocol.
Default:
Enabled
Remote Control
Web User Interface
HTTP Port
Specifies the HTTP port for the user
to access the web user interface of
the system.
Valid Values:
1-65535
Default:
80
Note:
Ensure that the configured
port is not used.
Web User Interface
HTTPS
Enables or disables the user to
access the web user interface of the
system using the HTTPS protocol.
Default:
Enabled
Remote Control
Web User Interface
HTTPS Port
Specifies the HTTPS port for the user
to access the web user interface of
the system.
Valid Values:
1-65535
Default:
443
Note:
Ensure that the configured
port is not used.
Web User Interface
To configure web server type via web user interface:
1.
Click on
Network
->
Advanced
.
2.
Select the desired value from the pull-down list of
HTTP
.
3.
Enter the desired HTTP port in the
HTTP Port
field.
4.
Select the desired value from the pull-down list of
HTTPS
.