BROADSOFT PARTNER CONFIGURATION GUIDE – YEALINK T4X IP PHONE
20-BD5476-00
©
2017 BROADSOFT INC.
PAGE 120 OF 150
account.2.sip_server.1.transport_type = %TRANSPORT%
account.2.sip_server.2.transport_type = %TRANSPORT%
##########################################################################
#############
## Failback
##
##########################################################################
#############
account.2.naptr_build =
account.2.fallback.redundancy_type =
account.2.fallback.timeout =
account.2.sip_server.1.address = %BWHOST-2%
account.2.sip_server.1.port = 5060
account.2.sip_server.1.expires = 3600
account.2.sip_server.1.retry_counts =
account.2.sip_server.1.failback_mode =
account.2.sip_server.1.failback_timeout =
account.2.sip_server.1.register_on_enable =
account.2.sip_server.2.address =
account.2.sip_server.2.port =
account.2.sip_server.2.expires =
account.2.sip_server.2.retry_counts =
account.2.sip_server.2.failback_mode =
account.2.sip_server.2.failback_timeout =
account.2.sip_server.2.register_on_enable =
account.2.dns_cache_type =
account.2.static_cache_pri = %STATIC-CACHE-PRI%
account.2.register_expires_overlap =
account.2.subscribe_expires_overlap =
##########################################################################
#############
## Register Advanced
##
##########################################################################
#############
##It configures the SIP server type for account X.0-Default,2-BroadSoft,4-
Cosmocom,6-UCAP
##The default value is 0.
account.2.sip_server_type = 2
account.2.unregister_on_reboot =
account.2.proxy_require =
account.2.register_mac =
account.2.register_line =
account.2.reg_fail_retry_interval =
##########################################################################
############
## NAT Settings
##
##########################################################################
############
##It enables or disables the NAT traversal for account X.0-Disabled,1-
Enabled
##The default value is 0.
