Yealink SIP-T2XP, Provisioning Manual

Page: 86 / 294

Yealink IP Phones Auto provisioning Guide
76
Parameter Permitted Values Descriptions Web Setting Path
network.static_dns_enable = 0 or 1
It enables or disables the phone to use
manually configured static IPv4 DNS when
Internet (WAN) port type for IPv4 is
configured as DHCP.
0-Disabled (use the IPv4 DNS obtained by
DHCP)
1-Enabled
The default value is 0.
It takes effect after a reboot.
Network->Basic-> IPv4 Config->Static
DNS
network.internet_port.ip = IPv4 address
It configures the IPv4 address when the IP
address mode is configured as IPv4 or
IPv4&IPv6, and the Internet (WAN) port type
for IPv4 is configured as Static IP Address.
The default value is blank.
It takes effect after a reboot.
Network->Basic-> IPv4 Config->Static
IP Address->IP Address
network.internet_port.mask = Subnet Mask
It configures the IPv4 subnet mask when the
IP address mode is configured as IPv4 or
IPv4&IPv6, and the Internet (WAN) port type
for IPv4 is configured as Static IP Address.
The default value is blank.
It takes effect after a reboot.
Network->Basic-> IPv4 Config->Static
IP Address-> Subnet Mask