Appendix
189
Parameter
Permitted Values
Descriptions
Web Setting Path
Example:
features.redial_tone = 125
The phone will continue to play the dial tone
after inputting “125” in the dialing screen.
If it is left blank, the phone will not play the
dial tone after inputting numbers in the
dialing screen.
The default value is blank.
features.partition_tone =
0 or 1
It enables or disables the phone with active
accounts to play tones in the dialing screen
differently from the phone with no active
accounts.
0-Disabled
1-Enbaled
The default value is 0.
features.password_dial.enable =
0 or 1
It enables or disables password dial feature
for the phone.
0-Disabled
1-Enabled
The default value is 0.
Features->General
Information->PswDial
Summary of Contents for SIP-T2XP
