Yealink IP Phones Auto provisioning Guide
198
Parameter
Permitted Values
Descriptions
Web Setting Path
0-Encrypted
1-Blank
2-Plaintext
The default value is 1.
features.pickup.group_pickup_enable =
(not applicable to SIP-T20P IP phones)
0 or 1
It enables or disables the phone to display
the GPickup soft key when the phone is in
the pre-dialing screen.
0-Disabled
1-Enabled
The default value is 0.
Features->Call Pickup->Group Call
Pickup
features.pickup.group_pickup_code =
String within 32
characters
It configures the group call pickup code.
The default value is blank.
Features->Call Pickup->Group Call
Pickup Code
features.pickup.direct_pickup_enable =
(not applicable to SIP-T20P IP phones)
0 or 1
It enables or disables the phone to display
the DPickup soft key when the phone is in
the pre-dialing screen.
0-Disabled
1-Enabled
The default value is 0.
Features->Call Pickup->Directed Call
Pickup
features.pickup.direct_pickup_code =
String within 32
characters
It configures the directed call pickup code.
The default value is blank.
Features->Call Pickup->Directed Call
Pickup Code
Summary of Contents for SIP-T2XP
