Yealink SIP-T2XP, Provisioning Manual

Page: 203 / 294

Appendix
193
Parameter Permitted Values Descriptions Web Setting Path
The default value is 0.
For SIP-T4X IP phones:
0-Disabled (power indicator LED does not
flash)
1-Enabled (power indicator LED slow
flashes (1000ms) red)
The default value is 1.
If it is set to 0, the status of the power
indicator LED is determined by the value of
the parameter
“phone_setting.common_power_led_enabl
e”.
phone_setting.mute_power_led_flash_enable =
(not applicable to CP860 IP phones)
0 or 1
It enables or disables the power indicator
LED to flash when a call is mute.
For SIP-T2xP/T19P IP phones:
0-Disabled (power indicator LED does not
flash)
1-Enabled (power indicator LED fast flashes
(300ms) green)
The default value is 1.
For SIP-T4X IP phones:
Features->Power LED->Mute Power
Light On