Yealink SIP-T2XP, Provisioning Manual

Page: 282 / 294

Yealink IP Phones Auto provisioning Guide
272
Parameter Permitted Values Descriptions Web Setting Path
SIP-T21P/T20P: X ranges from 1 to 2.
SIP-T19P: X=1.
Not applicable to CP860 IP phones.)
1-Enabled
The default value is 0.
account.X.call_center.queue_status_light_enable =
(SIP-T28P/T48G/T46G: X ranges from 1 to 6.
SIP-T26P/T22P/ T42G/T41P: X ranges from 1 to 3.
SIP-T21P/T20P: X ranges from 1 to 2.
SIP-T19P: X=1.
Not applicable to CP860 IP phones.)
0 or 1
It enables or disables the power indicator
LED to flash when the ACD call queue has
reached the maximum number of calls for
account X.
0-Disabled (power indicator LED does not
flash)
1-Enabled (power indicator LED fast flashes
(300ms) green)
If it is set to 0, the status of the power
indicator LED is determined by the value of
the parameter
“phone_setting.common_power_led_enabl
e”.
The default value is 0.
account.X.hoteling.enable =
(SIP-T28P/T48G/T46G: X ranges from 1 to 6.
SIP-T26P/T22P/ T42G/T41P: X ranges from 1 to 3.
SIP-T21P/T20P: X ranges from 1 to 2.
0 or 1
It enables or disables hoteling feature for
account X.
0-Disabled
1-Enabled