Yealink SIP-T2XP, Provisioning Manual

Page: 209 / 294

Appendix
199
Parameter Permitted Values Descriptions Web Setting Path
features.pickup.blf_visual_enable =
(not applicable to SIP-T20P IP phones)
0 or 1
It enables or disables the phone to display
a visual alert when the monitored user
receives an incoming call.
0-Disabled
1-Enabled
The default value is 0.
Features->Call Pickup->Visual Alert for
BLF Pickup
features.pickup.blf_audio_enable =
(not applicable to cp860 IP phones)
0 or 1
It enables or disables the phone to play an
audio alert when the monitored user
receives an incoming call.
0-Disabled
1-Enabled
The default value is 0.
Features->Call Pickup->Audio Alert for
BLF Pickup
features.blf_led_mode =
(not applicable to SIP-T19P, SIP-T48G and CP860 IP
phones)
0, 1, 2 or 3
It configures BLF LED mode and provides
four kinds of definition for the BLF/BLF list key
LED status.
For more information, refer to BLF LED Mode
on page 281 .
The default value is 0.
Note: The old parameter
“features.blf_and_callpark_idle_led_enable
” is also applicable to IP phones.
Features->General Information->BLF
LED Mode