Basic Call Features
85
To place a call using the hands-free speakerphone mode:
Do one of the following:
-
With the handset on-hook, press or the line key to obtain a dial tone.
Enter the desired number using the keypad.
Press , or the Send soft key.
-
With the handset on-hook, enter the desired number using the keypad.
Press , , or the Send soft key.
To place a call using the headset:
Do one of the following:
-
With the optional headset connected, press to activate the headset mode.
Press the line key to obtain a dial tone.
Enter the desired number using the keypad.
Press , , or the Send soft key.
-
With the optional headset connected, press to activate the headset mode.
Enter the desired number using the keypad.
Press , , or the Send soft key.
Note
The SIP-T27P IP phone can handle multiple calls at a time. However, only one active call
(the call that has audio associated with it) can be in progress at any time, other calls
are placed on hold. The SIP-T27P IP phone can handle a maximum of 50 calls at one
time.
To place multiple calls:
You can have more than one call on your SIP-T27P IP phone. To place a new call during
an active call, do one of the following:
-
Press the line key. The active call is placed on hold.
Enter the desired number using the keypad.
Press , , or the Send soft key.
-
Press or the Hold soft key to place the original call on hold.
Press the NewCall soft key.
Enter the desired number using the keypad.
Press , , or the Send soft key.
To permanently use the headset mode, refer to
Headset Prior
on page
58
.
