Basic Call Features
111
To set up a network conference call:
1.
Place a call to the first party.
2.
Press or the Conference soft key to place a new call.
The active call is placed on hold.
3.
Enter the number of the second party and then press , , or the Send soft
key.
4.
When the second party answers the call, press or the Conference soft key to
add the second party to the conference.
5.
Press or the Conference soft key to place a new call.
The conference is placed on hold.
6.
Enter the number of the new party and then press , , or the Send soft key.
7.
When the new party answers the call, press or the Conference soft key to add
the new party to the conference.
8.
Repeat steps 5 to 7 until you have added all intended parties.
The procedures to set up a network conference call on specific servers may be different
from introduced above. Contact your system administrator for more information.
You can use call park feature to place a call on hold, and then retrieve the call from
another phone in the system (for example, a phone in another office or conference
room). You can park an active call by pressing the call park key on the phone. If the call
is parked successfully, the response is either a voice prompt confirming that the call was
parked, or a visible prompt on the LCD screen.
Note
To configure a call park key via phone user interface:
1.
Press Menu->Features->DSS Keys.
2.
Select the desired DSS key.
3.
Press or , or the Switch soft key to select Key Event from the Type field.
4.
Press or , or the Switch soft key to select Call Park from the Key Type field.
5.
Press or , or the Switch soft key to select the desired line from the Account
ID field.
6.
(Optional.) Enter the string that will appear on the LCD screen in the Label field.
Call park is not available on all servers. Contact your system administrator for more
information.
