Yealink SIP-T22 User Manual Download

Page: 37 / 146

Customizing Your Phone

To deactivate the keypad lock via phone user interface:

Press Menu->Settings->Advanced Settings (password: admin) ->Phone
Settings->Keypad Lock.

Press or , or the Switch soft key to select Disable from Keypad Lock field.

Press the Save soft key to accept the change.

Keypad lock is configurable via web user interface at the path Features->Phone Lock.

You can press the Volume key to adjust the ringer volume when the phone is idle. You
can also press the Volume key to adjust the receiver volume of currently engaged audio
devices (handset, speakerphone or headset) when the phone is in use.

To adjust the volume when the phone is idle:

Press to adjust the ringer volume.

Note

If the ringer volume is adjusted to minimum, the icon will appear on the LCD screen.

Summary of Contents for SIP-T22



















































































































































Search results

Summary of Contents for SIP-T22

Reviews:

Related manuals for SIP-T22

Brands by name

Popular brands

Yealink SIP-T22, User Manual

Search results

Summary of Contents for SIP-T22

Reviews:

Related manuals for SIP-T22

Brands by name

Popular brands