Yealink SIP-T22 User Manual Download Page 141 | Manualshive

Page: 141 / 146

background image

Regulatory Notices

129

Contact your Yealink Authorized Reseller for information about service agreements

applicable to your product.

TO THE FULL EXTENT ALLOWED BY LAW, YEALINK EXCLUDES FOR ITSELF AND ITS
SUPPLIERS ANY LIABILITY,  WHETHER BASED IN CONTRACT OR TORT (INCLUDING
NEGLIGENCE), FOR INCIDENTAL, CONSEQUENTIAL, INDIRECT,  SPECIAL, OR PUNITIVE
DAMAGES OF ANY KIND, OR FOR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS,
LOSS OF INFORMATION OR DATA, OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN
CONNECTION WITH THE SALE, INSTALLATION, MAINTENANCE, USE, PERFORMANCE,
FAILURE, OR INTERRUPTION  OF ITS PRODUCTS, EVEN IF YEALINK OR ITS  AUTHORIZED
RESELLER HAS BEEN ADVISED OF THE POSSIBILITY  OF SUCH AMAGES, AND LIMITS ITS
LIABILITY  TO REPAIR, REPLACEMENT, OR REFUND OF THE PURCHASE RICE PAID, AT
YEALINK’S OPTION. THIS  DISCLAIMER OF LIABILITY  FOR DAMAGES WILL NOT BE
AFFECTED IF ANY REMEDY PROVIDED HEREIN SHALL FAIL OF ITS ESSENTIAL PURPOSE.

Save these instructions. Read these safety instructions before use!

The following basic safety precautions should always be followed to reduce risk of fire,

electrical shock, and other personal injury.

General Requirements



Before you install and use the device, read the safety instructions carefully
and observe the situation during operation.



During the process of storage, transportation, and operation, please always
keep the device dry and clean.



During the process of storage, transportation, and operation, please avoid
collision and crash of the device.



Please attempt not to dismantle the device by yourself. In case of any
discrepancy, please contact the appointed maintenance center for repair.



Without prior written consent, no organization or individual is permitted to
make any change to the structure or the safety design of the device. Yealink
is under no circumstance liable to consequences or legal issues caused by
such changes.



Please refer to the relevant laws and statutes while using the device. Legal
rights of others should be respected as well.

Environmental Requirements



Place the device at a well-ventilated place. Do not expose the device under
direct sunlight.



Keep the device dry and free of dusts.



Place the device on a stable and level platform.

«
...
139
140
141
142
143
...
»

Summary of Contents for SIP-T22



















































































































































Reviews:

No comments

Related manuals for SIP-T22

Brand: KARBONN Pages: 18

Brand: KARBONN Pages: 12

Brand: Kantronics Pages: 260

Brand: Samsung Pages: 193

Brand: Samsung Pages: 168

Brand: AU Pages: 30

Brand: Alcatel Pages: 44

Brand: Pantech Pages: 51

Brand: Xblue Networks Pages: 98

Brand: Allview Pages: 7

AQUOS Zeta SH-04F

Brand: NTT docomo Pages: 26

Brand: Zte Pages: 88

Brand: Binatone Pages: 104

Brand: Acer Pages: 66

Brand: D-Link Pages: 31

Brand: Lava Pages: 36

Brand: LG Pages: 20

Brand: LG Pages: 83

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands