Yealink SIP-T22 User Manual Download

Page: 16 / 146

User Guide SIP-T22P/SIP-T22 IP Phone

Icon

Description

Keypad Lock

Received Calls

Placed Calls

Missed Calls

Recording box is full

A call cannot be recorded

Recording starts successfully

Recording cannot be started

Recording cannot be stopped

Power Indicator LED

LED Status

Description

Solid green

The phone is initializing.
The phone is busy.
The phone is idle.
The call is placed on hold or is held.
The phone receives a text message or voice mail.

Fast flashing green (300ms)

The phone is ringing.
The call is mute.

Off

The phone is powered off.

Line key LED

LED Status

Description

Solid green

The line is in conversation.
The line is seized.

Fast flashing green

The line receives an incoming call.

Slow flashing green

The call is placed on hold.

Off

The line is inactive.

Summary of Contents for SIP-T22



















































































































































Search results

Summary of Contents for SIP-T22

Reviews:

Related manuals for SIP-T22

Brands by name

Popular brands

Yealink SIP-T22, User Manual

Search results

Summary of Contents for SIP-T22

Reviews:

Related manuals for SIP-T22

Brands by name

Popular brands