User Guide SIP-T22P/SIP-T22 IP Phone
88
3.
Click on Advanced.
4.
Select Network Conference from the pull-down list of Conference Type.
5.
Enter the conference URI (e.g., [email protected]) in the Conference URI
field.
6.
Click Confirm to accept the change.
To set up a network conference call:
1.
Place a call to the first party.
2.
Press the Conf soft key to place a new call.
The active call is placed on hold.
3.
Enter the number of the second party and press , , or the Send soft key.
4.
When the second party answers the call, press the Conf soft key to add the second
party to the conference.
5.
Press the Conf soft key to place a new call.
The conference is placed on hold.
6.
Enter the number of the new party and then press , , or the Send soft key.
7.
When the new party answers the call, press the Conf soft key to add the new party
to the conference.
8.
Repeat steps 5 to 7 until you have added all intended parties.
The procedures to set up a network conference call for specific servers may be different
from introduced above. Contact your system administrator for more information.
