Yealink SIP-T2 Series, Auto Provisioning Manual

Page: 157 / 241

Appendix
147
Parameter
Permitted
Values
Descriptions Web Setting Path
It takes effect after a reboot.
features.voice
_mail_tone_en
able =
0 or 1
It enables or disables the phone to
play the warning tone when receiving
a voice mail.
0-Disabled
1-Enabled
The default value is 1.
multicast.code
c =
(not
applicable to
SIP-T19P IP
phones)
PCMU
PCMA
G729
G722
G726-16
G726-24
G726-32
G726-40
G723_53
It configures the codec of multicast
paging.
Codecs G726-16, G726-24 and
G726-40 are not applicable to SIP-T21P
IP phones.
The default value is G722.
Features->General
Information->
Multicast Codec
multicast.recei
ve_priority.en
able =
0 or 1
It enables or disables the phone to
handle the incoming multicast paging
calls when there is a multicast paging
call on the phone.
0-Disabled
1-Enabled
The default value is 1.
Directory->
Multicast
IP->Paging Priority
Active
multicast.recei
ve_priority.pri
ority =
Integer from
0 to 10
It configures the priority of multicast
paging calls.
1 is the highest priority, 10 is the lowest
priority.
The default value is 10.
Directory->
Multicast
IP->Paging Barge
multicast.listen
_address.X.ip_
address =
(X ranges
from 1 to 10)
IP address:
port
It configures the listening multicast IP
address and port number for the
phone.
Example:
multicast.listen_address.1.ip_address
= 224.5.6.20:10008
The default value is blank.
Directory->
Multicast IP->
Listening Address