Appendix
145
Parameter
Permitted
Values
Descriptions
Web Setting Path
it is in talking using the handset.
0-Disabled
1-Enabled
The default value is 1.
features.ringer
_device.is_use
_headset =
0, 1 or 2
It configures the ringer device for the
phone in the headset mode.
0-Use Speaker
1-Use Headset
2-Use Headset & Speaker
The default value is 0.
Features->Audio-
> Ringer Device for
Headset
features.factor
y_pwd_enabl
e =
0 or 1
It enables or disables the phone to
prompt for the administrator password
when you long press the OK key to
perform factory reset.
0-Disabled
1-Enabled
The default value is 0.
features.expor
t_cfg_erase_p
wd =
0 or 1
It configures the phone to export the
configuration file with what type of
password.
0-Encrypted
1-Blank
2-Plaintext
The default value is 1.
features.picku
p.group_picku
p_enable =
(not
applicable to
SIP-T20P IP
phones)
0 or 1
It enables or disables the phone to
display the GPickup soft key when the
phone is in the pre-dialing screen.
0-Disabled
1-Enabled
The default value is 0.
Features->Call
Pickup->Group
Call Pickup
features.picku
p.group_picku
p_code =
String within
32
characters
It configures the group call pickup
code.
The default value is blank.
Features->Call
Pickup->Group
Call Pickup Code
features.picku
p.direct_picku
0 or 1
It enables or disables the phone to
display the DPickup soft key when the
Features->Call
Pickup->Directed
Summary of Contents for SIP-T2 Series
