Yealink SIP-T2 Series, Auto Provisioning Manual

Page: 144 / 241

Yealink IP Phones Auto provisioning Guide
134
Parameter
Permitted
Values
Descriptions Web Setting Path
(not
applicable to
SIP-T20P and
SIP-T19P IP
phones) receiving an incoming call.
0-Disabled
1-Enabled
The default value is 0.
Incoming Call
ldap.ldap_sort
=
(not
applicable to
SIP-T20P and
SIP-T19P IP
phones)
0 or 1
It enables or disables the phone to sort
the search results in alphabetical order
or numerical order.
0-Disabled
1-Enabled
The default value is 0.
Directory->LDAP->
LDAP Sorting
Results
features.call_n
um_filter =
String within
99
characters
It configures the characters the phone
filters when dialing.
If the dialed number contains
configured characters, the phone will
automatically filter these characters
when dialing.
The default value is “-,”.
Features->General
Information->Call
Number Filter
features.dnd_r
efuse_code = 404, 480 or
486
It configures a return code and reason
of SIP response messages when
rejecting an incoming call by DND.
404-No Found
480-Temporarily not available
486-Busy here
The default value is 480.
Features->General
Information->
Return Code When
DND
features.norm
al_refuse_cod
e =
404, 480 or
486
It configures a return code and reason
of SIP response messages when
rejecting an incoming call.
404-No Found
480-Temporarily not available
486-Busy here
The default value is 486.
Features->General
Information->
Return Code When
Refuse
features.call_c
ompletion_en
able =
0 or 1
It enables or disables call completion
feature.
0-Disabled
1-Enabled
Features->General
Information->Call
Completion