Yealink SIP-T2 Series, Auto Provisioning Manual

Page: 138 / 241

Yealink IP Phones Auto provisioning Guide
128
Parameter
Permitted
Values
Descriptions Web Setting Path
push_xml.serv
er =
IP address
It configures the IP address of the push
XML server.
The default value is blank.
Features->Remote
Control->Push XML
Server IP Address
push_xml.bloc
k_in_calling =
0 or 1
It enables or disables the phone to
block displaying the push XML screen
when in calling status.
0-Disabled
1-Enabled
The default value is 0.
Features->Remote
Control->Block
XML In Calling
push_xml.sip_
notify =
0 or 1
It enables or disables the phone to use
the push XML via SIP NOTIFY message.
0-Disabled
1-Enabled
The default value is 0.
Features->Remote
Control->SIP Notify
features.actio
n_uri_limit_ip
=
IP address
or any
It configures the IP address of server
from which the phone receives the
action URI requests.
Multiple IP addresses are separated
by commas.
If it is set to any, the phone will receive
action URI requests from any server.
If it is left blank, the phone will not
receive action URI requests.
The default value is blank.
Features->Remote
Control->Action
URI allow IP List
dialplan.area
_code.code =
String within
16
characters
It configures the area code.
The default value is blank.
Settings->Dial
Plan->Area
Code->Code
dialplan.area
_code.min_len
=
Integer from
1 to 15
It configures the minimum length of the
number prefixed with the area code.
The default value is 1.
Settings->Dial
Plan->Area
Code->Min Length
(1-15)
dialplan.area
_code.max_le
n =
Integer from
1 to 15
It configures the maximum length of
the number prefixed with the area
code.
The value must be larger than the
minimum length.
Settings->Dial
Plan->Area
Code->Max
Length (1-15)