Yealink SIP-T2 Series, Auto Provisioning Manual

Page: 29 / 241

Getting Started
19
SIP-T2xP/T19P/T42G/T41P and from 1 to 8 for SIP-T48G/T46G) and Custom:Name.wav
(custom ring tone).

When specifying a group for a contact, valid values are the group names (built-in
or custom groups).

When specifying an avatar for a contact, valid values are “Default: avatar name”
(for the built-in avatar) and “Config: avatar name” (for the custom avatar). This is
only applicable to SIP-T48G/T46G IP phones.
To customize a local contact file:
1. Open the template file using an ASCII editor.
2. For each group that you wish to add, add the following string to the file. Each starts
on a separate line:
<group display_name=”” ring=””/>
Where:
display_name=”” specifies the name of the group.
ring=”” specifies the ring tone for this group.
3. For each contact that you wish to add, add the following string to the file. Each
starts on a separate line:
<contact display_name=”” office_number=”” mobile_number=”” other_number=””
line=”” ring=”” group_id_name=”” default_photo=””/>
Where:
display_name=”” specifies the name of the contact (This value cannot be blank or
duplicated).
office_number=”” specifies the office number of the contact.
mobile_number=”” specifies the mobile number of the contact.
other_number=”” specifies the other number of the contact.
line=”” specifies the line for the contact.
ring=”” specifies the ring tone for the contact.
group_id_name=”” specifies the group you want to add the contact to.
default_photo=”” specifies the avatar for the contact (for SIP-T48G/T46G IP phones).
4. Specify the values within double quotes.
5. Save the change.
After editing the local contact template file, upload it to the provisioning server and
then specify the access URL in configuration files.