Yealink SIP-T19P User Manual Download | Manualshive

Page: 2 / 124

background image

ii

Copyright © 2013 YEALINK NETWORK TECHNOLOGY CO., LTD
Copyright © 2013 Yealink Network Technology CO., LTD. All rights reserved. No parts of this
publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, photocopying, recording, or otherwise, for any purpose, without the express written
permission of Yealink Network Technology CO., LTD. Under the law, reproducing includes
translating into another language or format.

When this publication is made available on media, Yealink Network Technology CO., LTD. gives
its consent to downloading and printing copies of the content provided in this file only for private
use but not for redistribution. No parts of this publication may be subject to alteration,
modification or commercial use. Yealink Network Technology CO., LTD. will not be liable for any
damages arising from use of an illegally modified or altered publication.

THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS GUIDE ARE
SUBJECT TO CHANGE WITHOUT NOTICE. ALL STATEMENTS, INFORMATION, AND
RECOMMENDATIONS IN THIS GUIDE ARE BELIEVED TO BE ACCURATE AND PRESENTED
WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. USERS MUST TAKE FULL
RESPONSIBILITY FOR THEIR APPLICATION OF PRODUCTS.

YEALINK NETWORK TECHNOLOGY CO., LTD. MAKES NO WARRANTY OF ANY KIND WITH
REGARD TO THIS GUIDE, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Yealink Network Technology
CO., LTD. shall not be liable for errors contained herein nor for incidental or consequential
damages in connection with the furnishing, performance, or use of this guide.

Hereby, Yealink Network Technology CO

.,

LTD. declares that this phone is in conformity

with the essential requirements and other relevant provisions of the CE, FCC.

This device is marked with the CE mark in compliance with EC Directives 2006/95/EC and 2004/108/EC.

This device is compliant with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including interference that may cause undesired

operation.

«
1
2
3
4
...
»

Summary of Contents for SIP-T19P





























































































































Reviews:

No comments

Related manuals for SIP-T19P

Brand: Sangoma Pages: 12

Brand: Samsung Pages: 2

Brand: Samsung Pages: 78

Brand: Samsung Pages: 34

Brand: Samsung Pages: 38

Brand: Samsung Pages: 125

Brand: TCL Pages: 55

Brand: Verykool Pages: 23

Brand: Icemobile Pages: 21

Brand: Pantech Pages: 261

Brand: Docomo Pages: 194

Brand: Mitel Pages: 60

Flash Mini 4031D

Brand: OneTouch Pages: 21

Brand: Audiovox Pages: 44

Alcatel VFD 900

Brand: TCL Pages: 74

Brand: Allview Pages: 88

Brand: Gigo Pages: 22

Fanvil XU Series

Brand: dais Technology Partners Pages: 6

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands