Yealink SIP-T19P User Manual Download

Page: 80 / 124

User Guide for the SIP-T19P IP Phone

Enter the numbers in the DND Authorized Numbers field.

For multiple numbers, enter a comma between every two numbers.

Click Confirm to accept the change.

When DND is enabled on the phone, the phone can still receive incoming calls from
the numbers specified in the DND Authorized Numbers field.

Note

You can configure your phone to forward incoming calls to another party by the static
forwarding. You can also forward calls while your phone is ringing, refer to the dynamic
forwarding.

Static Forwarding

Three types of static forwarding:



Always Forward: Incoming calls are immediately forwarded.



Busy Forward: Incoming calls are immediately forwarded if the phone is busy.



No Answer Forward: Incoming calls are forwarded if not answered after a period
of time.

DND authorized number is configurable via web user interface only.

Summary of Contents for SIP-T19P





























































































































Search results

Summary of Contents for SIP-T19P

Reviews:

Related manuals for SIP-T19P

Brands by name

Popular brands

Yealink SIP-T19P, User Manual

Search results

Summary of Contents for SIP-T19P

Reviews:

Related manuals for SIP-T19P

Brands by name

Popular brands