Yealink SIP-T19P User Manual Download

Page: 72 / 124

User Guide for the SIP-T19P IP Phone

To answer a call using the hands-free speakerphone mode:

Do one of the following:

Press .

With the handset on-hook and headset mode deactivated, press the Answer soft
key.

To answer a call using the headset:

Do one of the following:

Press .

With the headset mode activated, press the Answer soft key.

Answering When in Another Call

If you have an active call, and an incoming call arrives on the phone, do one of the
following:

Press the Answer soft key.

The incoming call is answered and the original call is placed on hold.

Press to access the new call.

Press or the Answer soft key.

The incoming call is answered and the original call is placed on hold.

Note

To end a call:

Do one of the following:

If you are using the handset, press the Cancel soft key or hang up the handset.

If you are using the headset, press the Cancel soft key.

If you are using the speakerphone, press or the Cancel soft key.

Note

To end a call placed on hold, you can press the Cancel soft key to end the call directly, or
press the Resume soft key to resume the call before ending it.

The phone will not receive a new incoming call when there are two calls on the phone.

Summary of Contents for SIP-T19P





























































































































Search results

Summary of Contents for SIP-T19P

Reviews:

Related manuals for SIP-T19P

Brands by name

Popular brands

Yealink SIP-T19P, User Manual

Search results

Summary of Contents for SIP-T19P

Reviews:

Related manuals for SIP-T19P

Brands by name

Popular brands