Yealink SIP-CP860, Auto Provisioning Manual

Page: 206 / 294

Yealink IP Phones Auto provisioning Guide
196
Parameter Permitted Values Descriptions Web Setting Path
indicator LED is determined by the value of
the parameter
“phone_setting.common_power_led_enabl
e”.
features.relog_offtime =
Integer from 1 to
1000
It configures the web access timeout (in
minutes).
The default value is 5.
It takes effect after a reboot.
Features->General
Information->Auto-Logout Time
(1~1000min)
features.direct_ip_call_enable = 0 or 1
It enables or disables the phone to make an
IP call directly.
0-Disabled
1-Enabled
The default value is 1.
Features->General Information->
Allow IP Call
features.allow_mute = 0 or 1
It enables or disables the phone to mute an
active call.
0-Disabled
1-Enabled
The default value is 1.
Features->General
Information->Allow Mute
features.group_listen_in_talking_enable =
(not applicable to CP860 IP phones)
0 or 1
It enables or disables the phone to enter
into the group listening mode by pressing
the speakerphone key when it is in talking