Yealink SIP-CP860 Auto Provisioning Manual Download

Page: 81 / 294

Appendix

If you have installed the Cool Edit application, double click to open it. Otherwise, you can download the installation package online:

http://www.toggle.com/lv/group/view/kl36218/Cool_Edit_Pro.htm

and install it.

To customize a ring tone using Cool Edit Pro:

Open the Cool Edit Pro application.

Click File to open an audio file.

Locate the ring tone file, click Open, the file is uploaded as follows.

A sample audio file loaded is shown as below:

Select and copy the audio waveform.

Select File->New to create a new file, set the channels as Mono, the sample rate as 8000 and the resolution as 16-bit.

Summary of Contents for SIP-CP860







































































































































































































































































































Search results

Summary of Contents for SIP-CP860

Reviews:

Related manuals for SIP-CP860

Brands by name

Popular brands

Yealink SIP-CP860, Auto Provisioning Manual

Search results

Summary of Contents for SIP-CP860

Reviews:

Related manuals for SIP-CP860

Brands by name

Popular brands