Yealink SIP-CP860, Auto Provisioning Manual

Page: 180 / 294

Yealink IP Phones Auto provisioning Guide
170
Parameter Permitted Values Descriptions Web Setting Path
The default value is 10.
zero_touch.enable = 0 or 1
It enables or disables zero touch for the
phone to perform provisioning during
startup.
0-Disabled
1-Enabled
The default value is 0.
Settings->Auto Provision->Zero Active
zero_touch.wait_time =
Integer from 1 to
100
It configures the duration time (in seconds)
of the phone displaying the zero-sp-touch
configuration screen when powered on.
The default value is 5.
Settings->Auto Provision->Wait Time
(1~100s)
push_xml.server =
(not applicable to CP860 IP phones)
IP address
It configures the IP address of the push XML
server.
The default value is blank.
Features->Remote Control->Push XML
Server IP Address
push_xml.block_in_calling =
(not applicable to CP860 IP phones)
0 or 1
It enables or disables the phone to block
displaying the push XML screen when in
calling status.
0-Disabled
1-Enabled
Features->Remote Control->Block
XML In Calling