Yealink CP960 Skype for Business User Manual Download Page 3

Page: 3 / 174

End User License Agreement

This End User License Agreement ("EULA") is a legal agreement between you and Yealink. By installing, copying or

otherwise using the Products, you: (1) agree to be bounded by the terms of this EULA, (2) you are the owner or an

authorized user of the device, and (3) you represent and warrant that you have the right, authority and capacity to

enter into this agreement and to abide by all its terms and conditions, just as if you had signed it. The EULA for this

product is available on the Yealink Support page for the product.

Patent Information

China, the United States, EU (European Union) and other countries are protecting one or more patents of

accompanying products and/or patents being applied by Yealink.

Customer Feedback

We are striving to improve our documentation quality and we appreciate your feedback. Email your opinions and

comments to

[email protected]

Technical Support

Visit Yealink WIKI (

http://support.yealink.com

) for the latest firmware, guides, FAQ, Product documents, and more. For

better service, we sincerely recommend you to use Yealink Ticketing system (

https://ticket.yealink.com

) to submit all

your technical issues.

Summary of Contents for CP960 Skype for Business















































































































































































Search results

Summary of Contents for CP960 Skype for Business

Reviews:

Related manuals for CP960 Skype for Business

Brands by name

Popular brands

Yealink CP960 Skype for Business, User Manual

Search results

Summary of Contents for CP960 Skype for Business

Reviews:

Related manuals for CP960 Skype for Business

Brands by name

Popular brands