Yealink CP935W User Manual Download

Page: 42 / 113

Yealink CP935W User Guide

1 to 25

: Broadcasts are sent to channel 1 to 25. We recommend that you specify these channels when broad-

casting with Polycom IP phones which have 25 channels you can listen to.

26 to 30

: Broadcasts are sent to channel 26 to 30. We recommend that you specify these channels when broad-

casting with Yealink IP phones running new firmware version (new paging mechanism).

Note

: All IP phones in the multicast paging group must be deployed in the same subnet since a broadcast is used. The phone

can only send/receive broadcasts to/from the listened channels. Other channels’ broadcasts will be ignored automatically by
the IP phone.

Topics

Sending Multicast Paging
Receiving Multicast Paging
Managing a Paging Call

Sending Multicast Paging

Your phone supports up to 31 groups for paging. You can assign a label to each group to identify the phones in the
group, such as All, Sales, or HR.

You can set a line key as Multicast Paging key or Paging List key on the phone, which allows you to send
announcements to the phones with pre-configured multicast address(es) on specific channel(s).

Note

: Multicast RTP is one way only from the sender to the multicast address(es) (receiver). For outgoing RTP multicasts,

all other existing calls on the phone will be placed on hold.

Topics

Setting a Multicast Paging Key
Sending a Paging by a Multicast Paging Key
Setting a Paging List Key
Setting a Paging Group
Sending Pages by a Paging List Key
Deleting a Paging Group

Setting a Multicast Paging Key

You can set a Multicast Paging key for a paging group, which allows you to send announcements quickly on the
idle screen.

Before You Begin

Get the multicast IP address and port number from your system administrator.

Procedure

1. Tap

Dsskey

Drag the desired line key to the

Edit

field.

Select

Key Event

from the

Type

field.

Select

Multicast Paging

(

Paging

) from the

Key Type

field.

(Optional.) Enter the paging group name in the

Label

field.

Enter the multicast IP address and port number (for example, 224.5.6.20:10008) in the

Value

field.

Enter the desired channel between 0 and 30 in the

Channel

field.

Select

Sending a Paging by a Multicast Paging Key

You can send a paging by using the Multicast Paging key when the phone is idle.

Before You Begin

Summary of Contents for CP935W


















































































































Search results

Summary of Contents for CP935W

Reviews:

Related manuals for CP935W

Brands by name

Popular brands

Yealink CP935W, User Manual

Search results

Summary of Contents for CP935W

Reviews:

Related manuals for CP935W

Brands by name

Popular brands