Yealink CP935W User Guide
43
3.
Enter the multicast IP address and port number (for example, 224.5.6.20:10008) in the
Address
field.
4.
Enter the string that will display on the phone screen in the
Label
field.
5.
Enter the desired channel between 0 and 30 in the
Channel
field.
6.
Select
.
7.
To set more paging groups, repeat steps 2 to 6.
Sending Pages by a Paging List Key
You can send a paging by using the Paging List key when the phone is idle.
Before You Begin
You need to set a Paging List key in advance.
Procedure
1.
Tap the Paging List key when the phone is idle.
2.
Select the desired paging group.
Both your phone and receiver’s phone play a warning tone and the multicast RTP session will be automatically
answered on the receiver’s phone in the speakerphone (hands-free) mode.
Related Topic
Deleting a Paging Group
You can delete any group from the paging group list.
Procedure
1.
Tap the Paging List key when the phone is idle.
Go to
More
>
Settings
>
Features
>
Paging List
.
If the Paging List key is not configured, you can also go to
Settings
>
Features
>
Paging List
to configure the
paging list.
2.
Select
after the desired paging group.
3.
Select
Delete
.
The phone prompts you to delete the paging group or not.
4.
Select
OK
.
If you want to delete all paging groups, you can tap
on the top-right of the phone screen.
Receiving Multicast Paging
Your system administrator has set a listening paging group for you, you can automatically receive a paging call
when the phone is idle.
When there is a voice call or a paging call in progress, the phone handles the new paging call differently according
to the multicast listening settings configured by your system administrator.
Managing a Paging Call
During a paging call, you can manage it manually at any time.
Procedure
l
Select
Hold
to place the current paging call on hold.
The paging call is placed on hold and the receiver releases the session.
l
Select
Resume
to resume the held paging call.
