47
|
eSC S1-X
–
User manual
FEATURES
•
Mappable relationship between throttle demand and inverter torque demand
•
Independent Front/Rear maps
•
Map breakpoints can be modified each 10% throttle demand step to achieve a non-linear shape
•
Boost demand configurable (maximum 100%)
•
Boost hold time counter configurable (max 200 s)
•
Safety control through detection of throttle failure and braking action
•
Diagnostic on sensor signals SCU setup, functions diagnostic monitoring through PC application (eSC Monitor)
1)
Set the scooter in P0
2)
Connect the USB cable of the SCU to the PC and to the SCU
3)
Go back to P1
4)
Open SCU Monitor clicking on the desktop icon:
5)
Open the software and:
-
Select the right COM Port as follows:
I.
Windows Start Menu -> Setting -> Devices -> Devices and Printers -> -> Right Click on icon-> Properties
-> Hardware ->
II.
The COM port needs to be then selected on each app setup menu: eSC-Monitor: -> select COM port from
drop down list -> X to exit and save.
III.
eSC-Loader: Setup -> -> select COM port from drop down list -> X to exit and save.
IV.
If the USB-RS232 cable is not seen as a virtual COM port update the drivers clicking on the file
and continue with other steps.
23.1
–
SCU management
NB:
•
Fw release up to 1.13 require the SCU monitor Team 1.1
•
Fw release from 1.14 require the SCU monitor Team 2.0
Summary of Contents for eSC S1-X
