YATO YT-82810, Original Instructions Manual

Page: 14 / 128

14
GB
O R I G I N A L I N S T R U C T I O N S
CHARACTERISTICS OF TOOL
The manual saw machine for wood is an ordinary tool, which is battery-powered and designed for cutting wood surfaces and sur-
faces made of materials produced on the basis of wood processing, such as plywood, particle boards, MDF etc. using by circular
saw blades. The saw machine allows for comfortable cutting of wood in the vertical and horizontal plane in an adjustable cutting
depth range and at angle, which is adjustable from 0 0 to 45 0 . Cutting can be carried out only in a straight line. Do not carry out
cutting along the curve (e.g. circle), as this can result in an accident or a destruction of the saw and power tool. Correct, reliable,
and safe operation of the device is dependent on its proper use, therefore:
Prior to working with the tool, you should read all the instruction and keep it around.
Attention! In any case, you should not use the tool without the mounted guards of the saw blade and without the splitting
wedge.
For any damage caused by failure to comply with safety regulations and instructions of this manual, the supplier is not responsible.
EQUIPMENT
The product is supplied in a complete state and requires no assembly. The product is supplied with the battery charger, charging
station (charger) and the guide.
Attention! The product of the catalog number: YT-82811 has not been equipped with a rechargeable battery and charging
station.
TECHNICAL PARAMETERS
Parameter Unit Value
Catalog number YT-82810, YT-82811
Rated voltage [V] 18 DC
Rated revs [min
-1
] 3800
Insulation class III
Max. cutting depth (0 O /45 O ) [mm] 54 / 40
Circular saw
- external diameter
[mm] 165
- internal diameter [mm] 16
- max. thickness [mm] 2.5
Weight [kg] 2.3
Noise level
- accustic pressure L
pA
± K
pA
[dB(A)] 85.0 ± 3.0
- accustic power L
wA
± K
wA
[dB(A)] 96.0 ± 3.0
Level of vibrations a
h
± K [m/s
2
] 5.33 ± 1.5
Degree of protection IPX0
Type of the battery Li-Ion
Capacity of the battery* [Ah] 2
Charger*
Input voltage
[V] 220 - 240
Mains frequency [Hz] 50 / 60
Output voltage [V] 21 DC
Input current [mA] 2.4
Rated power [W] 60
Time of charging** [h] 1
* only for models equipped with battery and charger
* * charging time applies only to the battery with a capacity listed in table
GENERAL WARNINGS FOR THE SAFETY OF POWER TOOLS
Warning! Read all safety warnings, illustrations and speci fi cations provided with this power tool. Failure to do so may
result in electric shock, fi re or serious injury.
Keep all warnings and instructions for future reference.
The term “power tool” used in warnings applies to all tools driven by power both wired and wireless.
Workplace safety