YATO YG-04311, Original Instructions Manual

Page: 10 / 27

10
O R I G I N A L I N S T R U C T I O N S
EN
function to empty the tank. In this position, closing the tap is only possible by manually turning the tap lever.
During operation, the water level in the device should be constantly monitored and topped up if necessary.
After fi nishing work, turn o ff the product by turning the knob to the position marked with a line, disconnect the cable plug from the
power socket, then empty the product tank and proceed with maintenance.
Emptying the product of water
Attention! Before emptying the product of water, you should turn o ff the product, and the plug of power cable disconnect from the
mains socket. It is also recommended to leave water in the product till it cools down..
The product should be drained of water using the tap. Drain all water into a separate container, then remove the product cover and
dry the product interior with a dry soft cloth or leave it to dry.
It is forbidden to empty the tank of the product by pouring water through its upper edge.
Maintenance of the product
Due to the use of the product for the storage of water, which is intended for human consumption, the product should be carefully
maintained. This will allow to keep the proper hygiene. The product must be subjected to maintenance after each use.
Before each cleaning, turn o ff the product, disconnect the plug of power cable from the mains wall socket. drain it of water, and
then wait for its cooling down and only then proceed to maintenance.
To clean the product, you should use only mild agents intended to clean kitchen utensils. It is forbidden to use abrasive cleaners for
example powder or cleaner milk, which is containing corrosive substances. Do not use cleaning solvents, gasoline or alcohols.
Cleaner should be diluted with water accordance to the information that came with it, then apply on a soft cloth and clean the
product from inside and outside.
Residues of the cleaning agent should be removed from the outside with a soft cloth soaked in water, then wipe it dry. The Interior
of the product should be rinsed with clean water and dry or let to dry.
ATTENTION! The product is not intended for cleaning with a stream of water. Do not immerse the product in water.
If the product there are accumulated limestone deposits, precipitated of water as so called “stone”, you should remove them.
Stone deposits do not represent a hygienic threat to water, but they can change its fl avor and reduce the performance of the
device. Too large a buildup of sediments can lead to damage to the product, therefore, you should regularly remove them.
The product should be fi lled with water, and then add the vinegar or product for removing limescale from products for the prepara-
tion of water intended for human consumption. Mount the cover, then boil the water in the product.
After boiling it, you should drain a little water through the tap, which will allow to rinse it from stone deposits. The remainder of
water should be boiled several times, until the complete removal of sediments.
After complete removal of the sediments you should disconnect the product from mains, fl ush the Interior with a cleaning solution,
and then the rinse its Interior repeatedly with clean water.
Attention! If the fi tered water will be used in the product, this should signi fi cantly reduce the formation of calcareous deposits.
Storage of the product
If the product will not be used for an extended period of time, you should completely remove water, and thoroughly dry its Interior.
Store the product indoors, protect against dust, dirt and moisture. It is recommended to store the product in the factory packaging.
Store the product in its working position. Do not install the products in layers. Do not place anything on the product.
TECHNICAL DATA
Parameter Unit Value
Catalog number YG-04311 YG-04316 YG-04319 YG-04321
Rated voltage [V] 220 - 240 220 - 240 220 - 240 220 - 240
Rated frequency [Hz] 50 / 60 50 / 60 50 / 60 50 / 60
Rated power [W] 2000 2500 2500 3000
Insulation class I I I I
Rated capacity [l] 9 12 18 25
Working temperature [ O C] 30 ÷ 110 30 ÷ 110 30 ÷ 110 30 ÷ 110
Net weight [kg] 3,1 3,5 3,9 4,5