YASKAWA SOLECTRIA XGI 1500-250/250-600 Installation And Operation Manual Download Page 5 | Manualshive

Page: 5 / 72

YASKAWA SOLECTRIA XGI 1500-250/250-600 Installation And Operation Manual Download Page 5

Installation and Operation Guide SOLECTRIA

®

XGI 1500-250 Series Inverters

DOCR-071074 (Rev 7, 30 MAY 2023)

5 of 72

General Safety Messages

Electric Shock Hazard

Components with hazardous voltage and energy will electrocute operator. Operator shall
avoid touching live components with hazardous voltage and energy.

Unqualified Operator Hazard

Operator may cause a hazardous situation by making incorrect installation or wiring
connections. A qualified technician shall do all installation and wiring connections to
comply with all local, national, or country specific guidelines for safety.

Electrical Shock Hazard

Operator may contact components with hazardous voltage and energy. Use proper safety
equipment including Personal Protective Equipment (PPE) when de-energizing the unit.
De-energize the unit, wait 5 minutes, and verify the absence of voltage before opening the
equipment or removing any protective shields.

General Damage to Equipment

Attempting to service the inverter improperly may result in damage. Contact Yaskawa
Solectria Solar Technical Support for maintenance.

Read and Follow Instructions

Failure to read and follow instructions may void the warranty. Install the inverter according
to the instructions in this manual.

SAVE THESE INSTRUCTIONS

This manual contains instructions for models:

XGI 1500-250/250-600
XGI 1500-225-600

XGI 1500-200/200-480

XGI 1500-175-480

«
...
3
4
5
6
7
...
»

Summary of Contents for SOLECTRIA XGI 1500-250/250-600









































































Reviews:

No comments