26
YASKAWA EUROPE
TOMP YEUOS7S 01A – Sigma-7 Series Advanced Safety Module – Instruction Manual
Advanced Safety Module for Sigma-7 SERVOPACKs
SGD7S-
DA0
8
F91, 400 V, Product Manual
SIEP YEUOS7S 01
Sigma-7-Series AC Servo Drive Sigma-7S SERVOPACK with
400 V-Input Power and EtherCAT
®
(CoE) Communications
»¼»È»Ä¹»É ƭÆ»¹¿Ű¹·Ê¿ÅļÅȺ̷Ĺ»º·¼»ÊÏźË»Ƒ
Product Manual
SIEP S800002 30
Further alarms and causes that can occur from the time the safety module is
parameterised with the Yaskawa software “Advanced Safety Module Parameter
Editor” can be found in the product manual.
A description of the alarms generated by the SERVOPACK and methods for clearing
the alarms can be found in the manual for your SERVOPACK.
Be sure to always use the most recent version of this manual.
Be sure to always use the most recent version of this manual.
Name
Name
Manual number
Manual number
For inspections of the safety module, follow the inspection procedures in the table below at least
once every year.
7 Inspection
Item
Frequency
Procedure
Remedy
Exterior
At least once
a year
Check for dust, dirt, and oil
on surfaces.
Clean with a cloth.
Loose screws
Check for loose terminal
block and connector
screws.
Tighten any loose screws.
