3 Teaching
3.9 Other Job-editing Functions
3-75
155507-1CD
RE-CSO-A037
DX100
3.9.2 Editing Interpolation Type
1. Select {JOB} under the main menu.
2. Select {JOB}.
– The JOB CONTENT window appears.
3. Move the cursor to the instruction area.
4. Select the line to be modified.
– The instruction on the cursor is displayed in the input buffer line.
5. Press [SHIFT] + the cursor key simultaneously.
– The interpolation type in the input buffer line changes.
– The modification of the speed according to the modification of the
interpolation type is calculated by the ratio to maximum speed at
each speed.
– Joint Speed: MAX=100.0%
Linear Speed: MAX=9000cm/min
(e.g.)
Joint Speed: 50% = Linear Speed: 4500cm/min
Linear Speed: 10% = Linear Speed: 900cm/min
6. Press [ENTER].
– The instruction on the cursor line is replaced with one on the input
buffer line.
158 of 554
