6-53
155507-1CD
RE-CSO-A037
DX100
6 Convenient Functions
6.5 PAM Function
Copying Data
To input the same data as those set previously, perform the following
operation.
1. Move the cursor to the line to be copied.
2. Select {EDIT} under the menu.
– The pull-down menu appears.
3. Select {LINE COPY}.
4. Move the cursor to the line where the item is to be copied.
5. Select {EDIT} under the menu.
6. Select {LINE PASTE}.
– The desired data is copied to the line.
– However, if the line where the data is to be copied does not have a
speed value or PL value, it cannot be copied.
Canceling the Adjustment
After the position adjustment in the PAM function, the job can be returned
to the status before adjustment only during teaching. In this case, follow
the procedures below.
Note that the job cannot be undone during playback.
1. Move the cursor to the line to be copied.
– After the position adjustment, the status shows “DONE”.
293 of 554
