22
Working with MotoAdmin
4 Working with MotoAdmin
4.1 Starting MotoAdmin
If the default settings are used during installation of MotoAdmin you can start it as follows:
- search for group
Motoman\MotoAdmin
in MS Windows program manager
- click on
MotoAdmin
If the language selection dialog is displayed after starting application, select desired language.
4.2 Multiple Instances of MotoAdmin
It depends on the selected connection protocol if one or multiple instances can access a robot
controller at the same time. It makes no difference if these instances are running on the same
or different PC’s.
If the connection protocol is (siehe Figure 2) Ethernet/http, multiple instances can connect to
the same robot controller. In contrast Ethernet/Bsc allows only one client.
Innerhalb einer Instanz von MotoAdmin kann gleichzeitig nur auf eine Robotersteuerung zu-
gegriffen werden.
If you want to connect your PC to multiple robot controller at the same time you have to open
multiple instances of MotoAdmin.
4.3 Establish a connection
Select one robot profile out of the list of already defined robot profiles and push correspond-
ing toolbar button.
Figure 11
Establish connection
In the status bar a message
Connected
is displayed.
4.4 Close a connection
An active connection can be closed with the
Disconnect
button..
22.08.2011
Yaskawa
Europe
GmbH
35/55
Summary of Contents for MOTOMAN DX100
Page 14: ...MotoAdmin 14 55...
