Installation and basic configuration
11
Select MotoAdmin out of the list of installed software and click on the Uninstall button.
Data communication between pc and robot controller for exchanging data or for remote con-
ifferent communication channels.
2.5 Connection types
trol is possible by using d
Serial communication
For serial communication an appropriate cable is necessary. MotoAdmin package contains
such a cable which is a standard null modem cable with 9pin female connectors on both sides.
To connect robot and pc attach one end of the cable to a RS232 port of your pc, the other end
of the cable connect to the serial port of robot controller. In case of XRC it is not possible to
.
use RS232 port of Teachbox
Ethernet communication
XRC robot controllers are not delivered with an Ethernet interface by default. Therefore to
Also PC system needs to have an Ethernet interface. Connection between PC and controller is
established by using standard Ethernet hardware.
use Ethernet communication with XRC an additional extension board must be ordered. For
installation of this board refer to „YASNAC XRC Ethernet I/F Board Instructions”. NX100
and DX100 controllers are always equipped with an Ethernet port.
Yaskawa Europe GmbH
22.08.2011
24/55
Summary of Contents for MOTOMAN DX100
Page 14: ...MotoAdmin 14 55...
