YASKAWA iC9200 Series Operating Manual Download Page 8

Page: 8 / 220

HB700 | CPU | PMC921xEx | en | 24-04

General

iC9200 Series

About this manual

Technical support

Objective and contents

Icons Headings

Contact your local representative of YASKAWA Europe GmbH if you encounter problems

or have questions regarding the product. If such a location is not available, you can reach

the YASKAWA customer service via the following contact:
YASKAWA Europe GmbH,

European Headquarters, Philipp-Reis-Str. 6, 65795 Hattersheim, Germany

Tel.: +49 6196 569 500 (hotline)

Email: [email protected]
YASKAWA America, Inc.

2121 Norman Drive South, Waukegan, IL 60085

Tel.: 1-800-YASKAWA (927-5292) or 1-847-887-7457 (Hotline)

Email: [email protected]

1.2

About this manual

This manual is the translation of the original instructions!
The manual describes the CPU PMC921xEx of the iC9200 Series.

■

It describes the structure, configuration and application.

■

The manual is targeted at users who have a background in automation technology.

■

The manual consists of chapters. Each chapter describes a completed topic. For

guidance, the manual provides:

–

An overall table of contents at the beginning of the manual.

–

References with pages numbers.

Validity of the documentation

Product

Order no.

as of version:

CPU iC921xM-x

PMC921xEx

CPU HW: 1

CPU FW: V2022.9.1

Important passages in the text are highlighted by following icons and headings:

DANGER
Immediate danger to life and limb of personnel and others.
Non-compliance will cause death or serious injury.

WARNING
Hazardous situation to life and limb of personnel and others.
Non-compliance may cause death or serious injury.

CAUTION
Hazardous situation to life and limb of personnel and others. Non-compliance

may cause slight injuries.
This symbol is also used as warning of damages to property.

NOTICE
Designates a possibly harmful situation. Non-compliance can damage the

product or something in its environment.

Supplementary information and useful tips.

Summary of Contents for iC9200 Series





























































































































































































































Search results

Summary of Contents for iC9200 Series

Reviews:

YASKAWA iC9200 Series, Operating Manual, Page: 8 / 220

Search results

Summary of Contents for iC9200 Series

Reviews: