YASKAWA DeviceNet SI-N3, Technical Manual

Page: 65 / 76

11 General Class Objects
YASKAWA ELECTRIC SIEP C730600 43A YASKAWA AC Drive-Option Card DeviceNet Technical Manual 65
„
DeviceNet Fault Code Conversion Table
1 11 Warning
Warning
0: No Warning
1: Warning
{ – Byte – 0
1 12 Fault Reset
Fault Reset
0: No Fault Reset
1: Fault Reset
{ { Byte 0,1 0
1 13 Fault Code
Current Fault Refer to DeviceNet
Fault Code Conversion Table on
page 65
for details
{ – Word – 0000
1 15 Control from Net (Status)
Run Command from DeviceNet
0: Enables the run command from
except for DeviceNet
1: Enables the run command from
DeviceNet
{ – Byte – 0
1 16 DeviceNet Fault Mode Normal 2 (vendor specific) { – Byte – 2
1 17 Force Fault
External fault
0: No External Fault
1: External fault (EF0)
Triggered by the rising edge of the
signal
{ { Byte 0,1 0
1 18 Force Reset
External fault status
0: No External Fault
1: External fault
Triggered by the rising edge of the
signal.
{ – Byte – 0
Drive Fault Code [Dec]
(MEMOBUS/Modbus #0080hex)
DeviceNet Fault Code [hex] Description
0 0000 None
2 3220 DC Bus Undervolt (Uv1)
3 5110 CTL PS Undervolt (Uv2)
4 3222 MC Answerback (Uv3)
6 2120 Ground Fault (GF)
7 2300 Over Current (oC)
8 3210 DC Bus Overvolt (ov)
9 4200 Heatsink Overtemp (oH)
10 4210 Heatsink Max Temp (oH1)
11 2220 Motor Overload (oL1)
12 2200 Inv Overload (oL2)
13 2221 Overtorque Det 1 (oL3)
14 2222 Overtorque Det 2 (oL4)
15 7110 DynBrk Transistor (rr)
16 7112 DynBrk Resistor (rH)
17 9000 External Fault 3 (EF3)
18 9000 External Fault 4 (EF4)
19 9000 External Fault 5 (EF5)
20 9000 External Fault 6 (EF6)
21 9000 External Fault 7 (EF7)
22 9000 External Fault 8 (EF8)
24 7310 Overspeed Det (oS)
25 7310 Speed Deviation (dEv)
26 7301 PG Open (PGo)
27 3130 Input Phase Loss (PF)
28 3130 Output Phase Loss (LF)
29 5210 Motor Overheat 1 (PTC input) (oH3)
30 5300 Operator Disconnected (oPr)
Instance
ID
Attribute Name Description Get Set Size Range Default