YASKAWA 175932-1CD, System Manual, Page: 42 / 64

3 Installation
3.6 Cable Connections
3-8
175932-1CD
175932-1CD
EcoTrim ET-1024 System
3.6.2 Connection to Local Electrical Service
After all the system components have been properly installed and
interconnected, connect local electrical service to the fused QS1 switch.
This connection point is located inside the DX200 controller. (see
Fig. 1-1
and Fig. 2-5 and the system diagram supplied with the system.).
WARNING
Connection of the EcoTrim ET-1024 System to local electrical service
must be done by a qualified, licensed electrician. Electrical and
grounding connections must comply with the National Electrical Code
(NEC), as well as local electrical codes.
NOTE
The EcoTrim ET-1024 System is configured for three-phase
480 V AC
primary power. For additional information, please
refer to the electrical drawings and schematics that are
included with your EcoTrim ET-1024 System.
42 of 64