manualshive.com logo in svg

Yara N-Sensor, Operation Manual, Page: 28 / 64

Share
Download
Yara N-Sensor Operation Manual Download Page 28

Yara N-Sensor V3.10  

 

Operation Manual

 

5 Operation 

Modes 

The N-Sensor can be operated in different so-called 

operation modes

. These modes de-

termine how the work screen and the agronomic calibration menu look like and what 
parameters are to be entered and displayed. 

Currently the following operation modes are implemented: 

• 

Base application (section 5.1) 

• 

N-application (section 5.2) 

• 

Target rate application (section 5.3) 

• 

Potato haulm killing (section 5.4) 

• 

Absolute N-application 

• 

Free calibration 

• 

Herbicide zone application 

• 

Spraying 

• 

Growth regulator application 

• 

Malting barley N-application 

 

Dependent on the local settings, only a subset of the above operation modes is visible 
and operational on a specific N-Sensor. At minimum, the 

Base application

 mode (section 

5.1) is available to all systems. 

To select an operation mode, from the main menu enter 

Setup | N-Senso

r

 and then press 

the

 Operation mode

 button subsequently until the desired operation mode appears (see 

section 3.2). Alternatively, dependent on the local settings, it is also possible to select 
the operation mode immediately after start-up by pressing the respective button on the 
start-up screen: 

 

 

 

If the 

Task specific presets

 option has been enabled (see section 3.3.1) and if the opera-

tion mode has been set for the selected task through 

CardWriter

, any manual setting 

(through the start-up screen or through the 

Operation mode

 button) will be ignored. 

Last revised: 28.01.2009 14:39 

Page 28 of 64 

Summary of Contents for N-Sensor

































































Reviews:

No comments