manualshive.com logo in svg

Yara N-Sensor, Operation Manual, Page: 12 / 64

Share
Download
Yara N-Sensor Operation Manual Download Page 12

Yara N-Sensor V3.10  

 

Operation Manual

 

2.4 

Alarms and warnings 

 

Not enough light:

 The current irradiance 

is too low to receive a suitable signal from 
the N-Sensor optics. 

The system switches to the preset uniform 
application rate. After the alarm is ac-
knowledged, the low light level symbol (see 
section  2.3.1) is displayed on the work 
screen until the irradiance conditions have 
improved. When this happens, the system 
continues to apply the uniform rate until it is 
switched back to sensor control manually. 

 

 

 

No connection to N-Sensor: 

The connec-

tion to the N-Sensor is lost. Either the N-
Sensor is not working properly or the con-
nection itself is faulty. Eventually the N-
Sensor is not powered properly. 

The system switches to the preset uniform 
application rate. After the alarm is ac-
knowledged, the no-N-Sensor-symbol (see 
section  2.3.1) is displayed on the work 
screen until the connection has been re-
established.  

 

 

 

No connection to the variable-rate con-
troller:

 The connection to the spreader or 

sprayer is lost. Probably the controller is 
not working properly or it is set up wrongly. 

The system will be automatically deacti-
vated and stop data logging and sending 
application rates. 

To circumvent this warning, the 

Unidirec-

tional only 

option may be checked in the 

Controller

 page of the 

System

 menu (see 

section3.3). With this option checked, no 
warning will be generated at all, but as-
applied rates will not be logged. 

 

Last revised: 28.01.2009 14:39 

Page 12 of 64 

Summary of Contents for N-Sensor

































































Reviews:

No comments