Yanmar 2TNV70, Operation Manual

Page: 27 / 142

SAFETY
TNV Operation Manual 9
A
WARNING
0000015en
BURN HAZARD!
• Keep your hands, and other body
parts, away from hot engine surfaces
such as the muffler, exhaust pipe,
turbocharger (if equipped) and engine
block during operation and shortly
after you shut the engine down. These
surfaces are extremely hot while the
engine is operating and could
seriously burn you.
• Failure to comply could result in death
or serious injury.
A
CAUTION
0000005en
COOLANT HAZARD!
• Wear eye protection and rubber gloves
when you handle Long Life or
Extended Life Engine Coolant. If
contact with the eyes or skin should
occur, wash with clean water.
• Failure to comply may result in minor
or moderate injury.
A
CAUTION
0000003en
FLYING OBJECT HAZARD!
• ALWAYS wear eye protection when
servicing engine and when using
compressed air or high-pressure
water. Dust, flying debris, compressed
air, pressurized water or steam may
injure your eyes.
• Failure to comply may result in minor
or moderate injury.
CAUTION
0000004en
• Only use diesel fuels recommended by
Yanmar for the best engine
performance, to prevent engine
damage and to comply with EPA / ARB
warranty requirements.
• Only use clean diesel fuel.
• NEVER remove primary strainer from
the fuel tank filler port. If removed, dirt
and debris could get into the fuel
system causing it to clog.
CAUTION
0000045en
NEVER attempt to adjust the low or high
idle speed limit screw. This may impair
the safety and performance of the
machine and shorten its life. If
adjustment is ever required, contact
your authorized Yanmar industrial
engine dealer or distributor.
CAUTION
0000021en
If any problem is noted during the visual
check, the necessary corrective action
should be taken before you operate the
engine.