47
10. SPECIFICATIONS
Model
WE200
P
erf
or
-
m
ance
Water sample flow
order
RO membrane
→
ion exchange
→
filtration
Water supply
Resin hose connected to tap water via quick coupler
Pure water sample
JIS K 0557
A4-equivalent
※
1
Sample size and mode
*2
0.5~1.0L/min
・
continuous
C
o
nf
igur
at
io
n
Pre-process cartridge
0.1
µ
m hollow fiber + activated charcoal included (PWF-1)
Flow sensor
Open pulse signal (NPN) output
Reverse osmosis (RO)
membrane pump
Pressurized water supplied to reverse osmosis (RO) membrane
Pressure gauge
Universal pressure switch for fluid
Reverse osmosis (RO)
membrane
Thin membrane mix type
Ion exchange
2
ℓ
ion exchange resin containing activated charcoal (CPC-T) 1
Water quality sensor
Electrode system
Final filtration
0.1
µ
m Membrane filter
Leak sensor
Parallel dual electrode system
S
tan
dard
s
Base water pressure
range
※
2
0.13~0.50MPa (1.3~4.9kgf/cm
2
)
Base water
temperature range
10°C~30°C
Safety device
Water cut-off error, Water quality sensor error, CPU board
error, upper/lower limit pressure error, leak error, flow
alarm/error, ELB
Maximum discharge
Approx.2
ℓ
/min (during system flush)
Power supply *3
Rated voltage: single phase AC100-240V, Rated frequency:
50/60Hz
Outer dimensions *4
(
W
×
D
×
H
)
350mm
×
430mm
×
470mm
Water sampling port
250mm above floor
Weight
Main body
:
Approx. 30kg (dry)
Indi
c
a
-
tions
Water quality
7-segment LED display (Conductivity/Resistivity)
Other
Wear item replacement alert display (ion exchange resin,
pre-process cartridge, reverse osmosis (RO) membrane,
membrane filter), warning display (leak alert)
Included accessories
Water supply hose (w/connection kit)
Power cord
Instruction manual
ion exchange resin cartridge(CPC-T)
pre-process cartridge
Membrane filter
Seal tape
Drain hose
1
1
1 (this document)
1
1
1
1
3m
×
1
Wear items
Component
Model
Product code
ion exchange resin cartridge
CPC-T
253256
pre-process cartridge
PWF-1
253099
reverse osmosis (RO) membrane
cartridge set
RO-1S
253257
Membrane filter (2 included)
MFRL727
9020010004
Thread seal tape
---
F0260021
※
1 Performance data based on AC100 to 240V power supply, 23°C
±
5°C room temperature and 65
%
RH
±
20
%
humidity. Peripheral operating temperature range is 5°C to 35°C.
※
2 Performance is guaranteed at 0.2 to 0.5MPa (2.0~.9kgf/cm
2
) base water pressure, at water temperature of 20°C.
Water sample sizes vary with water temperature changes.
※
3 100V power cord (with grounded 3-prong plug) is included. Use optional power cord for voltages other than
AC100V.
※
4 Protrusions excluded from standard dimensions.
Summary of Contents for Pure Line WE200
Page 50: ...48 11 WIRING DIAGRAM ...