15
5. RUNNING PROCEDURE
Touch Panel Operation
(4) Process parameter setting screen
Set process parameters on this screen.
(5) Alarm condition setting screen
Set conditions to issue alarms on this screen.
①
Using the numeric keys, enter a
value to a place where the cursor
is blinking.
②
After entering a value, press the
ENT key. If the ENT key is not
pressed, the previous value re-
mains unchanged. When the
ENT key is pressed, the cursor
moves to the next item. Enter a
value similarly. If a wrong value
has been entered, press the CLR
key to clear it.
③
After the entry, press the
PROCESS key to return to the
process screen.
④
To set alarm conditions, press the
ALARM key to display the SETUP
ALARM CONDITION screen.
①
Using the numeric keys, enter a
value to a place where the cursor
is blinking.
②
After entering a value, press the
ENT key. If the ENT key is not
pressed, the previous value re-
mains unchanged. When the
ENT key is pressed, the cursor
moves to the next item. Enter a
value similarly. If a wrong value
has been entered, press the CLR
key to clear it.
③
After the entry, press the
PROCESS key to return to the
process screen.
④
The default values and input
ranges are as follows.
Param. No.
1
2
3
4
5
6
7
Default value
20
10
20
10
20
2
2
Input range
1 – 50
1 – 60
1 – 60
1 – 60 1 – 100 1 – 30
1 – 10
Summary of Contents for PDC510
Page 2: ......
Page 28: ...25 11 WIRING DIAGRAM ...