Yamato DP-6700, Technical Manual

Page: 25 / 55

YCO-201008
DP-6700 Technical Manual
1-22
A4(104) Span coefficient 2 (large) Auto Auto Auto
A5(105) Span coefficient 3 (large) Auto Auto Auto
A6(106) Span adjustment zone Auto Auto Auto
A7(107) "lb:oz" Display 1 1 1
A8(108) LED External output 0 0 0
A9(109) Transmission for TDW 0 0 0
B0(110) Factory setting 11 12 13
B5(115) Transmission of ad value 0 0 0
B6(116) Input judgment of filter "L" at
stable
80 80 80
B7(117) Input convergence of filter "S"
at stable
2 2 2
B8(118) Input difference of filter "S" at
stable
2 2 2
B9(119) Auto-tare delay, subtracting
grading
25 25 25
C7(127) Keyboard tare 0 0 0
C8(128) Recommended calibration
method
5 5 5
C9(129) Store display hold mode Auto Auto Auto
1.3.5 Initializtion of CPU board
Related pages: Page 1-5 1.3.1 How to enter test mode and meanings of panel indications
Page 1-13 (3) Factory Parameter Mode (to set increment, area, default values
and others)
Page 1-17 1.3.4 List of initial parameter values before shipment by scale
type/weighing capacity
If you replace the CPU board, you need to initialize the board.
Initialize the CPU board according to the follow procedure:
Procedure Indication
Display the internal count in test mode referring to
1.3.1
How to enter test mode and meanings of panel indi-
cations on Page 1-5 . When the internal count is shown
on the panel, press the key while holding down the
key: it switches to span adjustment mode. (See
1.3.6 Span adjustment (calibration) on Page 1-22)
In span adjustment mode, press the key while hold-
ing down the key; it switches to system parameter
mode.
Chapter 1 Adjustment method